HP StorageWorks MSL5000 Series User Manual page 137

Figure E–3: Single MSL5026/MSL5030, 2 hosts/2 drives
1 SCSI Terminator
2
0.5M cable
3
Host cable (Bus 1, to host system)
4
Host cable (Bus 0, to host system)
Figure E–4: Single MSL5026/MSL5030, 1 host/1 drive, sequential mode
1 SCSI Terminator
2 Host cable (to host system)
Notes:
• There is no SCSI connection to the library controller module.
• There is a terminator installed on the library controller module.
MSL5000 Series Library User Guide
1 3 4
2
Configuration Examples
1
2
1
E–3