Maintenance - HP StorageWorks MSL5000 Series User Manual

Operation

Maintenance

Selecting this option lets you perform system maintenance on, or replace, the
following components (see Figure 4–30):
• Clean Drive
• Replace Drive
• Set User Defaults
• Reboot Module
• Flash Drive From SCSI
• Flash Drive From Tape
• Drive Format
• Force Reconfiguration
The Maintenance menu options, intended for operator use, are described in Chapter 6,
"Maintenance." Additional Maintenance menu options used by service technicians are
described in the hp StorageWorks MSL5000 series library Maintenance and Service
Guide.
Figure 4–30: Maintenance screen
4–32 MSL5000 Series Library User Guide