Rack Stability - HP StorageWorks MSL5000 Series User Manual

About this Guide

Rack Stability

WARNING: To reduce the risk of personal injury or damage to the equipment, be
sure that:
•
•
•
•
•
xii
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. Contact with
this surface could result in injury.
WARNING: To reduce the risk of injury from a hot component, allow the
surface to cool before touching.
Power supplies or systems marked with these symbols indicate the
presence of multiple sources of power.
WARNING: To reduce the risk of injury from electrical shock,
remove all power cords to completely disconnect power from the
supplies and systems.
Any product or assembly marked with these symbols indicates that the
component exceeds the recommended weight for one individual to
handle safely.
WARNING: To reduce the risk of personal injury or damage to the
equipment, observe local occupational health and safety requirements
and guidelines for manually handling material.
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
In single rack installations, the stabilizing feet are attached to the rack.
Racks are coupled in multiple rack installations.
Only one rack component is extended at any time. A rack may become
unstable if more than one rack component is extended for any reason.
MSL5000 Series Library User Guide