Lcd Contrast Controls; Power - HP StorageWorks MSL5000 Series User Manual

See the section on "Replacing a Cleaning Cartridge in a Reserved Slot" in Chapter 6
for detailed removal information.
CAUTION: DLT, SDLT, and LTO Ultrium 1 cleaning cartridges must only be used in
their respective drive types or drive damage can result.
CAUTION: Remove media from all drives and slots prior to library transport.
Figure 4–17: Move media screen

LCD Contrast Controls

Select these options to increase or decrease the contrast of the LCD display (see
Figure 4-13). Incremental steps are set by adjusting the LCD contrast controls from
the library Status screen. Incremental steps can range from 0 to 31 depending on your
preference. These settings are volatile and are restored to default values upon reboot or
power cycling.

Power

Select this option to initiate a library power-down operation. After a successful power
down, a confirmation message appears (see Figure 4–18).
IMPORTANT: The library moves the shuttle assembly to the parked position before powering
down. This is necessary for any library transport.
MSL5000 Series Library User Guide
Operation
4–17