Locking Your Telephone Interface By The System Administrator - T-Home Comfort Pro CM 500 User Manual

Locking Your Telephone Interface by the System Administrator

Key
middle sidekey
lower sidekey
Locking Your Telephone Interface by the
System Administrator
The system administrator can lock your telephone interface via a setting for your user group. All keys of your
telephone no longer function aside from a few exceptions (e.g. the receiver key and the number keys).
■
You can still make calls with your telephone but no system functions can be configured.
■
The redial function, the communications system telephone books, the Info menu and the state-dependent
menus cannot be activated. (The state-dependent menus are described in the Telephoning starting on
page 57 chapter). The personal (local) phone book of the mobile unit is, however, available because the
lock only affects communications systems functions.
■
If the system administrator has authorised you to do so, you can set the time group of the communications
system (please refer to System menu "Central settings" starting on page 124 also). If your user group
authorisation changes according to the time group, then it is possible that your telephone's interface lock
will be cancelled due to a change in time group..
Please contact your system administrator if you have questions regarding your authorisations.
Duration (key press) ... State
short
long
short
long
stand-by
stand-by
stand-by
call
stand-by
Description
calls the programmed function
programming with the desired function
calls the programmed function
increases volume (for current call only)
programming with the desired function
Functions
33