System" Menu - T-Home Comfort Pro CM 500 User Manual

"System" Menu

Delete
Delete all
Note: The Comfort Pro communications system offers an additional call filter which applies to the
entire system. Calls from call numbers of the system call filter – when your user group is accordingly
configured – are not signalled on your mobile unit. Contact your system administrator if you have
questions.
"System" Menu
Select system
Auto search
system with the strongest signal. The mobile unit can only check in to the relevant system if it
has previously been subscribed to that system. Please contact your system administrator if
necessary.
[System name]
is highlighted. Select an entry via the navigation keys. Press
attempt to establish a connection to the selected system.
Subscriptions
New system : You subscribe the mobile unit to a new system. Enter the authentication code and the
PARK code optionally. For more information, consult your system administrator.
[System name]
The change only applies to the display when idle. Your actual call number is not changed.
Delete
Use
Show IPEI : The international mobile unit code is displayed (IPEI = International Portable Equipment
Identity). This may be necessary to designate your mobile unit on the communications system.
Version info : Information on the hardware and software status of the mobile unit is displayed.
: The entry is deleted after an enquiry.
: The list is deleted after a confirmation prompt.
: The mobile unit automatically checks in to the currently available communications
: List of systems where the mobile unit is already subscribed. The selected system
Edit
: Use to change the system name and the call number of the mobile unit.
to delete the subscription for the corresponding system.
The Device Menu
and the mobile unit will
107