Table of Contents
Advertisement
Enquiry, Toggling, Transfer and Conference
Transferring an Internal/External Call to an Internal Subscriber
You have dialled an internal enquriy call (see page 72).
The subscriber called via enquiry answers:
Announce the call transfer.
Press softkey briefly.
The subscriber called via enquiry does not answer:
Press softkey briefly. The other subscriber is called.
If the called subscriber accepts the call, he/she will be connected to the waiting call. If the call is not accepted
within a certain time interval (the communications system is 45 seconds by default, the system administrator
can change this value), you get an automatic recall. You are re-connected to the original subscriber when you
press the
call key again.
If the system administrator has configured the Music on hold upon transfer on calling feature in the
Configurator , the caller on hold hears "Music on Hold" while his/her call is signalled to the other internal
subscriber. This setting also determines whether, when calling back, the caller hears "Music on Hold" or a
ringing tone or busy signal.
The subscriber called via enquiry is busy:
Press softkey briefly.
/
Use the navigation keys to select the
Ok
Enter another call number to transfer the call.
... or
Press R key briefly. You are speaking with the waiting subscriber once again.
softkey.
Disconnect
menu entry and confirm with the
Telephoning
73
Advertisement
Table of Contents
