Using Routes To Make Calls; Menu When Dialling - T-Home Comfort Pro CM 500 User Manual

External/Internal Calling

Using Routes to Make Calls

The Comfort Pro establishes calls to a desired subscriber either automatically or via specific routes. Your
system administrator configures these routes in the Comfort Pro and specifies how each route is seized. In
order to manually seize a specific route for a desired call, dial the routing code before dialling the (internal or
external) call number. By making specific calls via routes, you can e.g. contact subscribers in the branches of
a large company network. It is also possible to use a manually-entered routing code to record your call-charge
data for external private and business calls separately.
enter routing code, dial call number
for enquiry:
enter routing code, dial call number
Your system administrator can provide you information on current routes and your codes.

Menu when Dialling

N
Note: Menu items marked with an * are only displayed if the system administrator has
given corresponding user authorisation.
You have pressed the
briefly and then select ...
Take : You wish to take a current call from one terminal over to your DECT telephone and continue the call on
the DECT telephone. To do so, your DECT telephone and the other terminal must have the same
internal call number.
Pick-up :* You pick up the call intended for another telephone in your pick-up group.
Pick-up select :* You pick up a call for any other internal subscriber Enter the call number of the other
telephone. If the other telephone is already in the call state (e.g. an answering machine is making an
announcement), you pick up the call. The subscriber for whom you picked up the call must belong to
a user group for which "Call removal" authorisation is activated, otherwise "Pick-up select" is not
possible.
call key and wish to dial a call number. During a call, press the
Telephoning
softkey
61