Table of Contents
Advertisement
"System menu" / Total Menu
System menu: "Call forwarding"
Call forwarding
: Programming call diversions for your own telephone. If there are multiple trunk keys
configured on your telephone, you can programme call diversions for each of these keys. To do so,
select the desired key (e.g.
Immediately
/
Dest.
: Enter the call number you wish to forward to (for entering the call number, please refer to the
chapter entitled External Seizure and Entry of Call Numbers starting on page 49).
Time
: When programming call forwarding after time, enter the time in seconds after which a call is to
be forwarded (10 sec ... 120 sec). If you do not enter a value, the default time interval
provided by the system administrator at system configuration is used (default: 20 seconds).
Internal calls
which calls are to be forwarded.
On
/
Off
: Switching call forwarding on or off. Active call forwarding is indicated by a "+" sign. This is
followed by the call forwarding destination.
Note: All calls for the call numbers of your device are forwarded. If a number is in use on more than
one telephone, then calls made to any of the other telephones will be forwarded as well.
Divert MSN
(MSN call forwarding): Use the "Divert MSN" (MSN = Multiple Subscriber Number) to forward
incoming external calls per MSN to external destinations. Several MSNs can be grouped together
(this is configured by the system administrator) and forwarded to a common destination number. A list
of the configured MSNs and MSN groups is displayed.
Immediately
/
Dest.
: Enter the external call number to be forwarded to. For the "Divert MSN" type of call
forwarding, the (external) destination number is always entered without the area code.
On
/
Off
: Switching call forwarding on or off. Active call forwarding is indicated by a "+" sign.
This is followed by the call forwarding destination. A "?" preceding the entry,
(e.g.
? MSN Group 1
there are different call forwarding types activated for this group.
L1: [internal call number]
After delay
/
Busy
: Select the desired forwarding type.
/
External calls
After delay
/
Busy
: Select the desired forwarding type.
), means that call forwarding is active for only some MSNs or that
) and then press the
/
Int./ext. calls
(internal & external calls): Select
The Device Menu
Ok
softkey.
113
Advertisement
Table of Contents
