Table of Contents
Advertisement
Installation
USB and External Charging Port
There is a mini USB port (2.0) on the lower right side of the mobile unit. It has two functions:
■
As an interface for connecting to the PC e.g. to load data to/from the device. When the mobile unit is
connected to a PC it is charged simultaneously. The charging process is slower, however, than when the
mobile unit is charged in the charger.
■
As a connection socket for a USB charger. This charging process is also slower than when charging in the
charger.
Be sure to use only a shielded USB cable.
Comfort Pro CM 510 – USB Port: Removing the Cover
The opening of the USB port is closed with an undetachable cover. If a USB cable is not used, please be sure
to close the opening to be sure the device can be operated in accordance with its protection class. Remove
the cover by tugging it out of the housing on the upper edge.
Never tug it out on the lower edge!
Setting Up and Connecting the Charger
"Comfort Pro CL 500"
As additional component you can purchase the Comfort Pro CL 500 charger
(material no. 40246042).
Comfort Pro CM 500: The mobile unit can be operated without changing the charger.
Comfort Pro CM 510: When operating the mobile unit, you
have to remove the two lateral guides in the charger. These
are easy to lift up on the inner edge using a fingernail or a
paper clip.
16
USB and External Charging Port
Advertisement
Table of Contents
