Table of Contents
Advertisement
Telephoning
Menu Before and During a Call
When the handset is in the idle or call state, state-dependent menus are dis-
played when you press the Menu softkey briefly. Frequently used features are
displayed, which you can then activate.
Example: Another telephone in your pickup group rings and you want to accept
the call. Press the Menu softkey briefly, select
choice with OK. You will be connected with the caller.
Or a subscriber is busy and you want to be called back. When you hear the busy
signal, press the Menu softkey and confirm
The state-dependent menus are individually described at the end of the follow-
ing chapters.
"Selection" Menu in the Idle State
Press the Menu softkey briefly (this is also possible when you have already
...
pressed the call key), and then select ...
...
you have previously parked, for instance to make enquiries or forward calls (see
MenuCard "Conversation" starting on page 20).
...
pick-up group.
...
pick up a call to any other telephone. If the other telephone is in the call state (e.
g. an answering machine is making an announcement), you pick up the call.
...
initiate an announcement to another system terminal.
...
ment to a single system terminal. The microphone of the end terminal called will
be switched on and the person you are calling can immediately answer your
announcement. The "Intercom" function cannot be used for announcements to a
group of terminals.
...
charges for your telephone.
16
Unpark call
Consecutively unparks one or more connections which
Pick-up
* You pick up a call made to another telephone in your
Pick-up select.
* Once you have entered the telephone number, you can
Announcement
* Once you have entered the telephone number, you can
Intercom
After entering the device ID, you can initiate an announce-
Charges
You see the charges for the last call and the total call
Pick-up
up and confirm your
Callback
with OK.
Advertisement
Table of Contents
