Duct Kit Assembly - L.B. White TS080 Owner's Manual And Instructions

1. Extend duct kit to 3.65 m. length.
2. Insert tabs on adapter into slots at blower outler of
heater. See Fig. 3. Push down to secure in place.
See below typical installation of heater located to
exterior of tent.
1. Insert the tabs of the diffuser into the vertical slots at
the blower outlet. Push down on diffuser to secure
into place. See Fig. 4.
2. Tent side wall material may be layed within channel of
the diffuser to give a finished look to the installation.
See below for typical installation.
FIG. 3
TENT SIDE WALL
TENT DRAPED
OVER DUCT
DUCT KIT
FIG. 4
TENT SIDE WALL
TENT DRAPED OVER
DIFFUSER CHANNEL
DIFFUSER

DUCT KIT ASSEMBLY

Accessory Part #
SLOTS
TAB
DUCT ADAPTER
W/ TABS
UNIT DIFFUSER ASSEMBLY
Accessory Part # 09389
SLOTS
BLOWER OUTLET
TAB
08978
DUCT KIT
DIFFUSER
CHANNEL
13