Device Settings; Device Parameters; To Specify Device Settings - Oce cm 2520 User Manual
Network scanner operations
Hide thumbs
Also See for cm 2520:
- Safety information & getting started (27 pages) ,
- Programming date & time (3 pages)
Table of Contents
Advertisement
3
3.22
Device Settings
Device information can be set.
Device Parameters
The device parameters are as follows:
Item
Mac Address
Network Speed
Reminder
When turning the main power switch OFF then ON, wait for 10 seconds
or longer before turning it ON again; otherwise the copier may not func-
tion normally.
The MAC address of this machine's network card is displayed under
"MAC Address".
To specify device settings
1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 3-8 for more details.)
2
In the Network Setting screen, touch [9 Detail Setting].
3
In the Detail Setting screen, touch [1 Device Setting].
The Device Setting screen appears.
4
Specify the desired settings.
3-100
Specifying Settings From the Control Panel
Description
Used to verify the machine's Mac address.
Sets the network speed.
Be sure to turn the main power OFF and then back ON after
changing the setting.
cm2520
Advertisement
Table of Contents
