Schedule Setting - Oce cm 2520 User Manual
Network scanner operations
Hide thumbs
Also See for cm 2520:
- Safety information & getting started (27 pages) ,
- Programming date & time (3 pages)
Table of Contents
Advertisement
3
Note
To display the Administrator Setting screen, refer to "To display the Ad-
ministrator Setting screen" on page 3-8.
Note
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
Schedule Setting
You can specify the schedule for sending the total counter. An example for
specifying "Schedule1" is described below.
The settings that can be specified are described below.
When "Daily" is specified as the notification period
Item
Interval of Day(s)
3-108
Specifying Settings From the Control Panel
Description
Enter the days each month for sending the schedule. To
change the value, press the [C] (clear) key, and then use the
keypad to type in the value (between 1 and 31).
cm2520
Advertisement
Table of Contents
