Oce cm 2520 User Manual page 254

Specifying Settings From the Control Panel
7
In [Administrator Setting] — [1 System Setting] — [3 Date/Time Set-
ting], specify the following settings.
– Specify the current time and time zone.
Note
To display the Administrator Setting screen, refer to "To display the Ad-
ministrator Setting screen" on page 3-8.
For the TCP/IP setting procedure, refer to "TCP/IP Settings" on
page 3-48.
For the user authentication and account track setting procedure, refer to
User's Guide [Copy Operations].
For the date and time setting procedure, refer to User's Guide [Copy Op-
erations].
Note
If the NTP server (Time Adjustment Setting) settings are specified, the ex-
act time can be set on this machine over a network. For details, refer to
"Time Adjustment Settings" on page 3-102.
cm2520
3
3-143