Table of Contents
Advertisement
Step 3: After finishing configuring the WAN connection, press Continue to finish the QuickStart. At
this time, you will see the system rebooting itself to apply the changes.
ADSL Connect Mode
For ADSL connect mode there are 5 types of connection protocols:
PPPoE, PPPoA, IPoA, MPoA
and
Pure
Bridge.
PPPoE
VPI/VCI: Enter the information provided by your ISP.
Username: Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive). This is in the format of "username@ispname" instead of simply
"username".
Password: Enter the password provided by your ISP. You can input up to 32 alphanumeric
characters (case sensitive).
Service Name: This item is for identification purposes. If it is required, your ISP will provide you
the necessary information. Maximum input is 32 alphanumeric characters.
Encapsulation mode: Select the encapsulation format. Select the one provided by your ISP.
Authentication method: Default is Auto. Please consult your ISP on whether to use Chap, Pap or
MSCHAP.
PPP IP Address: Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to
automatically obtain an IP address from your ISP.
21
Hide quick links:
Advertisement
Table of Contents
