Keithley 2100 User Manual page 88

Section 4: Front Panel Operations
Figure 4-38
The Open dialog box
5. Highlight the 5407_xx.xx.bin file and click Open (see
version update. The 2100 (USBTMC) Update Version window will display a "Please wait"
message while the file is executing, as shown in
Figure 4-39
Model 2100 firmware upgrade in progress
6. Once installation of the DSP firmware update file is complete, you will be prompted to
restart your Model 2100 to continue the update (see
off, and then power it on again.
Figure 4-40
Restart device to complete update message
4-40
Model 2100 6 1/2-Digit Resolution Digital Multimeter User's Manual
Return to Section Topics
Figure 4-38) to start the DSP firmware
Figure 4-39.
Figure 4-40). Power the Model 2100
2100-900-01 Rev. D / September 2011