Keithley 2100 User Manual page 128

Appendix B: Remote Interface Reference
CALCulate:LIMit:LOWer {<value>|MINimum|MAXimum}
Set the lower limit for limit testing. You can set the value to any number from 0 to 120% of the
highest range for the present function.
CALCulate:LIMit:LOWer?
Query the lower limit for the limit testing.
CALCulate:LIMit:UPPer {<value>|MINimum|MAXimum}
Set the upper limit for limit testing. You can set the value to any number from 0 to 120% of the
highest range, for the present function.
CALCulate:LIMit:UPPer?
Query the upper limit for the limit testing.
CALCulate:MXB:MMFactor {<value>|MINimum|MAXimum}
Set the value of M.
CALCulate:MXB:MMFactor? [MINimum|MAXimum]
Query the value of M.
CALCulate:MXB:MBFactor {<value>|MINimum|MAXimum}
Set the value of B.
CALCulate:MXB:MBFactor? [MINimum|MAXimum]
Query the value of B.
CALCulate:DB:REFerence {<value>|MINimum|MAXimum}
Store a relative value in the dB Relative Register. You must turn on the math operation before
writing to the math register. You can set the relative value to any number between 0dBm and
200dBm.
CALCulate:DB:REFerence? [MINimum|MAXimum]
Query the dB relative value.
B-16
Model 2100 6 1/2-Digit Resolution Digital Multimeter User's Manual
Section Topics
Return to 2100-900-01 Rev. D / September 2011