PB-1525 Wood Pellet Burner System: Installation and Operation Manual
Rev 1.0, OCTOBER 2011
(This copy must be sent to Pellergy LLC within 10-days of installation along with the
Chimney draft (Cold)__________________[in-H
Chimney draft (Hot)___________________[in-H
Temperature outside house_______________[°F]
Values at Firing State
Stack gas temperature _______________[°F]
CO________________[ppm]
O
_________________[%]
2
CO
_________________ [%]
2
Efficiency _________________ [%]
Fan High Speed
Fan Med Speed
Fan Low Speed
Start Feed Time
Running Feed On
Temperature Limit
Date of Installation: ___________System Serial Number: ___________
Job Number/Name: ______________________________
Address:______________________________________________________
______________________________________________________________
Burner Measured Values
burner setup data; complete both sides)
Burner Settings
_________________ [1-255]
_________________ [1-255]
_________________ [1-255]
____________________[seconds]
____________________[seconds]
____________________[seconds]
(Pellergy Copy)
<300 ppm TARGET
10~12% CO2 TARGET
O]
2
O]
2
Page 62 of 67