Pellergy PB-1525 Installation & Operation Manual page 14

PB-1525 Wood Pellet Burner System: Installation and Operation Manual
Rev 1.0, OCTOBER 2011
must be positioned such that:
a. The overhead anchor point must be able to continuously
support a minimum of 100 pounds. See Figure 2.3 below
b. The conveyor must be mounted such that the drop tube is a
minimum of 15-inches above the PB-1525 pellet feed tube
opening (Max 30-inches) See Figure 2.3 below
c. The conveyor must be mounted such that the drop tube is a
minimum of 6-inches laterally away from the PB-1525 pellet feed
tube opening (Maximum of 12-inches). See Figure 2.3 below
ANCHOR
POINT
WARNING!
Figure 2.3: Conveyor mounting details.
 The pellet feed conveyor assembly can weigh as much as
100-pounds when in operation and filled with pellets.
Ensure a suitable overhead anchor point from which to
hang the conveyor.
 Do not direct-couple the conveyor drop tube to the PB-
40-50º
CONVEYOR
E
CHAIN/CABL
15-30"
6-12"
Page 14 of 67