Installation Of The Pellet Conveyor - Pellergy PB-1525 Installation & Operation Manual

PB-1525 Wood Pellet Burner System: Installation and Operation Manual
Rev 1.0, OCTOBER 2011
Figure 2.3a: Pellergy wood pellet burner mounted to a Pellergy's 5-Section,

Installation of the Pellet Conveyor

When determining the location of the pellet conveyor mounting
position, the location of both the PB-1525 burner and the pellet hopper
must be considered
1. The conveyor is designed to be hung from a single-point overhead
anchor. Inspect the overhead in the vicinity of the PB-1525 burner
and select a suitable point for the overhead anchor. The conveyor
ASME Rated Cast Iron Boiler
Page 13 of 67