Pellergy PB-1525 Installation & Operation Manual page 12

PB-1525 Wood Pellet Burner System: Installation and Operation Manual
Rev 1.0, OCTOBER 2011
MOUNTING
PLATE
(WILL VARY
BY BOILER)
PELLERGY
BURNER
Figure 2.2: Burner assembled to mounting plate.
Figure 2.3a below for a typical layout of a Pellergy System with a
Pellergy KPA-100-5 Cast Iron, 5-Section boiler
Installations will vary; however, this figure shows a typical installation
with the standard 550LBS working hopper. The working hopper can be
replaced by compatible bulk pellet bins for direct feed installations.
WOOD/OIL
BOILER
BURNER TO
MOUNTING PLATE
GASKET
MOUNTING PLATE
TO BOILER GASKET
(WILL VARY BY
BOILER)
Page 12 of 67