PB-1525 Wood Pellet Burner System: Installation and Operation Manual
Rev 1.0, OCTOBER 2011
Figure 2.7: Factory Terminal Connections within the Pellergy Supplied
enclosure.
There are two external electrical connections required to connect the PB-
1525:
1.) Connection to a 120V AC Power Source
2.) Connection to a thermostat (Normally Open Switch with no power)
There are two required components of the PB-1525 system that need to
be field connected. These are the:
1.) Auger Motor
2.) Stack Temperature Sensor
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17
Page 21 of 67