Introduction - Pellergy PB-1525 Installation & Operation Manual

PB-1525 Wood Pellet Burner System: Installation and Operation Manual
Rev 1.0, OCTOBER 2011

Introduction

Congratulations on your purchase of a PB-1525 Wood Pellet Burner
System! This manual is provided to give you an overview of the system
and to provide important instruction as to the installation, operation and
maintenance of the system. In order to ensure years of safe, trouble-free
operation, please follow the guidelines and instructions set forth in this
manual.
The PB-1525 wood pellet burner system is intended for installation with fully
approved, regulatory compliant domestic hot water boilers and furnaces
including dedicated Pellergy boilers and furnaces. The PB-1525 is
intended for use with ¼" Premium Wood Pellets as defined by the Pellet
Fuels Institute. The Burner System uses an external pellet conveyor (auger)
to deliver pellets from Pellergy and third-party external pellet bins/hoppers
to burner.
Following the installation of your system, your Pellergy trained certified
installation professional (Certified Installer) will review with you the
operation of your system, record important information as to the installed
system, give you a copy of this manual and ask that you acknowledge
receipt of such. If at any time you have questions or concerns, please
contact Pellergy customer service, or your Certified Installer.
Page 3 of 67