Chapter Two: Installation - Pellergy PB-1525 Installation & Operation Manual

PB-1525 Wood Pellet Burner System: Installation and Operation Manual
Rev 1.0, OCTOBER 2011
NOTE When installed as the only automatic source of central heat
within a home or business check with your existing insurance,
mortgage provider, and local building codes before installing
the PB-1525 wood pellet burner system. Fully understand any
limitations or restrictions that may apply as to the use of a solid
fuel fired central heating unit.
This system provides thermostatically controlled heat that is
intended to operate unattended for up to 3-4 weeks with proper
maintenance and automatic burn chamber cleanout.
The PB-1525 system provides an alarm output contact that can
integrate to an existing or add on home alarm or automatic dial
out system.

Chapter TWO: Installation

WARNING! The PB-1525 wood pellet burner system shall be installed by
Pellergy trained certified installation professionals ONLY.
Any unauthorized installation of the PB-1525 system voids the product
warranty and may result in damage or loss of property, injury to personnel,
and even death.
The PB-1525 Wood Pellet Burner System may only be used to convert
Pellergy-approved boilers and furnaces. Pellergy engineering staff works
closely with our Certified Installers to ensure compatibility between the
burner and the heat exchanger.
The PB-1525 Wood Pellet Burner System installs through the use of a custom
hopper opening.
 Pellets other than Premium Wood Pellets may cause
system damage. Use only ¼" Premium Wood Pellets as
designated and by the Pellet Fuels Institute.
Page 6 of 67