Built-In Construction Details - DCS 30” BGB Series Installation Instructions And User Manual

INSTALLATION
BUILT–IN CONSTRUCTION DETAILS
Standard layout for non-combustible enclosure:
28-1/2"
10-1/8"
20"
35-1/2"
Max.
NOTE: See Fig. 05
for ventilation notes.
WARNING!
If installing the grill into a non-combustible
enclosure, all combustible construction must still be
outside the 12 inch clearance zone. If your island is
made of stucco over the top of wooden studs, the
wood can not be inside the 12 inch clearance zone to
combustible, even though the stucco is what is
touching the grill area.
Note:
The gas connection must be visible to the user (through a door opening or similar).
Gas piping and connectors must be clamped within the the enclosure to avoid contact with moving parts and hot surfaces.
Where the gas piping passes through an opening in the enclosure, the piping must be protected for a distance of at least 2" (50mm) either side of the
opening.
The gas connector must comply with the Standard for Connectors for Outdoor Gas Appliances & Manufactures Homes, ANSI Z21.75/ CSA 6.27.
The connection must be no longer than 6' (1820mm) in length and be suitable for outdoor installation.
13-3/4"
Bottom of
support flange
2"
22-3/4"
25-1/2"
NOTE: If using a backguard
apron or rear wall, locate
electrical service on the right
hand side for rotisserie motor
connection
3" Min. for Lid Clearance
22-3/4"
18-1/2"
4" x 4"
opening
for gas
28"
supply line
opening for access
doors/drawers
(see Fig. 05 and 06 for
ordering information)
grill
exhaust
3" (to non-combustible
construction /
minimum lid clearance)
12" (to combustible
construction)
10-1/16"
3/4"
Layout for insulated jacket only - combustible enclosure:
34-7/8"
18-1/4"
11-1/8"
20"
35-1/2"
Max.
FIG.04
10
NOTE: If using a backguard apron or rear
wall, locate electrical service on the right
hand side for rotisserie motor connection
3" Min. for Lid
Clearance
INSULATED JACKET
Size Part No.
23-3/4"
30
4" x 4" opening
for gas supply line
3-1/2"
28"
opening for access doors/drawers
(see Fig. 05 and 06 for ordering
information)
70859