Hardware; Camera - Kodicom ND-1016 User Manual

3.1 Hardware

3.1 Hardware
Hardware setup allows users to modify external device configurations, such as cameras, alarms and
monitors.

3.1.1 Camera

3.1.1 Camera
You can set up each camera configuration individually via the options available below.
6
1 Camera : Select camera which you want to set up.
2
Camera Display : It shows the picture of the selected camera. When you make adjustment to the
camera settings you can see the changes in the picture.
3
Information : It shows all setup information of the selected channel.
4 Attriblute : Setup the camera name, camera in use or disabled, apply PTZ protocol and whether
covert camera is enabled or disabled.
Adjustment : Change the settings for the Brightness, Hue, Contrast and saturation. If you click
5
"Default" button, it will return to the default settings. AGC (Auto Gain Control) is an additional
feature (automatic control function of brightness).
Apply to : The selected channel setting value can be applied to all or just selected
channels.
☞
☞
[Note]
• Picture control should not be used as the main setup point. It's just for
adjustment please check the setup of the camera and monitor output first.
6 Linked Alarm-In : Select Alarm-In which will be linked with the camera. When an event occurs in
a Alarm-In any camera which is linked with the sensor will record.
2
4
3
5
42
42
1