1.3 Basic Connection
1.3 Basic Connection
The devices and cables connection to Back Park should be installed like the above
picture.
Connecting the Power Cable to Power Supply.
1
[Warning]
• Power Cable should be plugged in after all devices are connected. The
system will automatically boot once the power cable is plugged in. The front
On/Off Switch is used when you reboot the system manually.
Connect Mouse to upper PS/2 terminal .
2
Connect Keyboard to lower PS/2 terminal.
3
Connect VGA Monitor to VGA input on VGA card.
4
Connect camera signal to BNC terminals (coaxial type).
5
6
Connect Printer to LPT1 terminal.
17
17