Network Connection - Kodicom ND-1016 User Manual

1.7 Network Connection

1.7 Network Connection
Switch hub (100Mbps)
DVR system support remote control, remote search, remote S/W upgrade by network. In
network setup it is recommend to use switch hub with TCP/IP protocol for LAN/WAN.
Network Cable Connection Method
1. Connect UTP cable with network port of System back panel.
2. Connect another UTP cable line with switch hub.
☞
☞
[Note]
• Please contact your ISP when you connect DVR system with network to prevent network
problem.
• Please use CAT5 cable which is made by RJ-45 jack and Switch hub(100Mbps) to TCP/IP
connection .
UTP Cable(CAT5)
21
21
Router
LAN/WAN
internet