Table of Contents
Advertisement
3.5 Network
3.5 Network
3.5.1 Network
3.5.1 Network
Enter network details and configure network settings such as the bandwidth, port number and user
connection number
1
2
3
4
5
6
7
1
IP Auto Allocation (DHCP) : Tick the IP Auto Allocation box receive address automatically from DHCP
server if DVR is connected to a DHCP network. If connected to a LAN network without DHCP server
then manually input network details for the connected network, input IP address, Subnet mask and
Gateway.
2
Auto DNS Server setting : Input first DNS server address to main DNS server and support DNS server.
[Note]
☞
☞
• Please contact network administer if you don't know IP address or network
circumstance.
3
Bandwidth : Set up maximum bandwidth for DVR data transmission by network.
Acceptable count : Set up acceptable number of connected clients (remote users).
4
[Note]
☞
☞
• When many clients connect to the DVR the system this can interfered with
basic operation due to a large load on system resources. The count function is
made to prevent system being overloaded by too many users, so if this happens
restrict client connect number .
WEB DVR Support : Select to enable or disable the Web DVR facility.
5
CMS Support : Select to enable or disable the CMS software connection.
6
7
Port number : Input network port which data is transferred. Click "Port Check" button to find is
selected port number is available on your network.
65
65
Advertisement
Table of Contents
