Object Watch - Kodicom ND-1016 User Manual

3.3.2 Object watch

3.3.2 Object watch
These settings are used to commence recording when object is detected within a user-defined zone.
You can optimize the recording environment by associating PTZ devices, alarms, and cameras to
object detection events.
2
5
6
7
8
Camera : Select camera which you wish to set up.
1
2
Motion detection grid : Displays the picture for the selected camera. Use the mouse to select and
deselect blocks within the area to be used for motion detection. The Green color means area is active
and a blank block means deactivated.
Motion detection area setup : Click left mouse button and drag or select areas for motion detection
area designation.
Motion detection area removal : Click right mouse button and drag or deselect areas to remove
from the motion detection area.
3
Motion setting : This type of recording records movement of objects in the designated areas when
objects are moved.
Block Count : Configure the number of blocks within the motion grid.
Sensitivity : Set up the sensitivity of the motion detection.
Set all area : Select all the motion detection blocks on the grid.
Erase all area : Clear all the motion detection blocks from the grid.
4
Rec time :
Pre rec time : Set the pre recording time for the period between when the motion was detected and the
time when the DVR starts recording.
Post rec time : Set the post recording time for the period after when the motion has stopped and when
the DVR stops recording.
58
58
3
4
1
9