Faq - Kodicom ND-1016 User Manual

2. FAQ

2. FAQ
The system power does not turn on.
1
☞ Check if the power cable is connected correctly.
☞ Check if the input voltage is correct.
☞ If the system power does not turn on when the power cable is connected correctly, please
contact the service Center.
The system power is turned on, but no video data is displayed on the monitor.
2
☞ Check if the monitor power cable is connected properly
☞ Check to make sure the monitor is turned on.
☞ Check if the video output cable of DVR is properly connected to the monitor.
☞ Unplug the power cable and plug in again.
☞ When VGA monitor is selected as an image output, it takes about 1 minute after power
connection to view the image on the VGA monitor. Be sure to wait until the processing window
appears.
The camera numbers are displayed on the screen, but camera images are not displayed.
3
☞ Check if the camera video output is connected to DVR system correctly.
☞ Check if the power cable on the camera is connected correctly.
☞ Check if the video cable connecting the camera to DVR system has a problem.
☞ This problem can occur because of weak video signal if the video data is transferred by a
video data distributor when the video is connected to multiple systems. Connect the camera
directly to DVR.
☞ Turn off DVR system and turn it on again.
The camera video is shown on the screen, but the system doesn't record video.
4
☞ Check to make sure the recording mode in the recording setting mode is not set to
"NONE".
☞ Turn off the DVR and turn it on again.
It is impossible to search through the recorded video.
5
☞ Check if there is recorded video data for the time that you are trying to search.
☞ If there is no recorded video data, check to make sure the record mode in the recording
setting mode is not set to "NONE".
Audio data recorded with video data is not playing.
6
☞ Check if the audio recording option is correctly set to the camera you wish to record audio.
☞ Check if the audio play option in the Search mode is selected.
☞ Check if the microphone and speaker port on the rear of system are connected correctly.
☞ Check if the connected microphone is working properly.
☞ Check if the connected speaker is working properly.
109
109