Log/Ptz/Playback Tab - Kodicom ND-1016 User Manual

2.5 Log/ Ptz
2.5 Log/ Ptz
Log Tab
Log Tab
Click "Log" tap to display a list of events about Continuous Recording, Motion, Object Watch, Pre
Recording, ATM/POS, Network Connection.
PTZ Tab
PTZ Tab
Select "Ptz" Tab to display buttons for PTZ control.
* PTZ Control
1. On Watch Mode Select channel which has PTZ camera setup.
2. Click "Ptz" tab.
3. Click PTZ function button to control.
1
1 Auto Pan : It is function to observe automatically along two points which have been previously
"Auto Pan" : Click button to enable AutoPan and click again to disable.
"Start" : Button to setup PTZ start position.
"End"
2 Preset : It is function to setup PTZ position to a Preset ID and later recall the ID to move to that
"Set Preset" : Save PTZ position information to Preset ID
"Move Preset" : Move to PTZ position which was setup for Preset ID.
"Enter" : Use button to enter on PTZ OSD menu.
"OSD" : Use button to open PTZ OSD menu.
"Del" : Use button to delete Preset ID
3 Focus/Zoom/Speed : It is function to control PTZ Focus, Zoom and P/T Speed.
4 Direction Button : It is function to control PTZ direction by 8-way.
/Playback Tab
/Playback Tab
setup.
: Button to setup PTZ end position.
position.
2
31
31
3 4