Hardware Setup; Cameras; Sensors - Kodicom DN-1808S Manual For Installer And User

1.11.1 Hardware setup - Cameras
2 3
1
1
[Setup]
Check the box to use the camera.
2
[Name]
Type in camera names. Up to 14 characters are allowed.
3
[Sensor]
You can connect sensors to available cameras. This
function enables cameras to record automatically
when the connected sensor(s) is triggered.
To connect a sensor to a camera, type the number of
the sensor in appropriate camera number.
If you wish to connect multiple sensors to a camera,
type sensor numbers in the box, separating them by
comma.
Example: In order for Camera 4 to start recording
when Sensor 1 or Sensor 3 is triggered, type "1,3" in
[Sensor] box against Camera 4
Kodicom DN Manual
4
! Number of sensors supported ;
-4 sensors : DN1808S, 4408S, 44208S
-8 sensors : All of the rest models.
-16 sensors: available as an option for any 16-
channel model.
See page 18 for changing Sensor type.
4
[Motion]
You can link cameras to other available cameras. This
function enables linked cameras to record automatically
when the main camera detects movement.
To link a camera to another camera, type the number of the
camera you wish to connect in appropriate camera number.
If you wish to connect multiple cameras to a camera, type
camera numbers in the box, separating them by comma.
Example: In order for Camera 5 to start recording when
Camera 1 or Camera 2 detects motion, type "1,2" in [Motion]
box against Camera 5
Hardware setup allows users
to modify external devices
configurations, such as
cameras, sensors and
controls.
16