Transporting The Colormerge Module; Cleaning The Colormerge Dichorics - High End Systems Dichroic Theatre Series User Manual

3. Gently move the outer knob from side to side and up and down until the lamp is
centered within the reflector.
4. Once the lamp is centered, turn the outer knob clockwise to lock it in place.
5. Turn the inner knob either clockwise or counterclockwise to achieve an optimum flat
field. To correct for adding ColorMerge this knob should be turned clockwise from
its original position.

Transporting the ColorMerge Module

Caution: Insure that all color mixing filters are in the fully closed position
before shipping or transporting to prevent glass from breaking.

Cleaning the ColorMerge Dichorics

Warnings: Disconnect power and turn power switch off before servicing.
Equipment surfaces may reach temperatures up to 67° C (153° F).
Allow the fixture to cool before handling.
Clean the Dichroic glass using a mild glass cleaner (containing no ammonia) and a soft,
lint-free cotton cloth.
Caution: Serious damage can occur to the optical system due to lamp explosion.
If a lamp breaks in the Source Four fixture, inspect the ColorMerge
module for broken filters or loose glass particles. The ColorMerge
module may require internal service to clean out any loose or broken
glass.
Dichroic Theatre ™ User Manual ColorMerge Installation
C
C-3