Installing A Line Cord Cap - U.k. Only; Vatic Fitter Heads Information - Danmark; Setting Up The Power Supply Link - High End Systems Dichroic Theatre Series User Manual

• green and yellow = earth
• blue = neutral
• brown = live
Warning: Class 1 equipment - This equipment must be earthed.

Installing a Line Cord Cap - U.K. Only

In the United Kingdom, the colours of the cores in the mains lead of this equipment
may not correspond with the colored markings identifying the terminals in the
fixture's plug. Therefore, install a line cord cap in accordance with the following
code:
• The core which is coloured green and yellow must be connected to the plug
terminal which is marked with the letter "E," or by the earth symbol
coloured green, or green and yellow.
• The core which is coloured blue must be connected to the terminal which is
marked with the letter "N" or coloured black.
• The core which is coloured brown must be connected to the terminal which
is marked with the letter "L " or coloured red.
Warning: Class 1 equipment - This equipment must be earthed.

Vatic Fitter Heads Information - Danmark

Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket

Setting up the Power Supply Link

A single ColorPower can control up to 12 color mixing units in any combination (six
fixtures/modules per output).
Caution: Dichroic Theatre color mixing fixtures and modules must be
operated with the High End Systems ColorPower supply.
Connection to any other manufacturer's power supply could
damage the ColorCommand fixture and ColorMerge module.
Disconnect mains power from ColorPower before linking color
changer cables to fixtures.
ColorPower has two output links that supply 40VDC and data to the Dichroic Theatre
Series products. The products can be combined and linked in any configuration, as
long as there are no more than six (6) fixtures per output link. Because a ColorPower
2-2 Setup and Configuration
eller
Dichroic Theatre™ User Manual
, or