Table of Contents
Advertisement
ColorMerge Module
The ColorMerge module is an innovative dichroic color mixing
accessory for the ETC Source Four
ColorMerge gives you the freedom to mix any color as well as
perform live fades from one color to another smoothly, silently,
and cleanly.
ColorMerge attaches between the rear housing assembly and the
front barrel assembly of the Source Four, and does not interfere
with the gate area. You can still use patterns, irises, gobo
changers, and all the usual accessories with your Source Four
fixture. Like all Dichroic Theatre Series products, ColorMerge
uses dichroic borosilicate glass which will not fade or change
color. So, the color you create during rehearsals is the same color
you will see a week, month, or year later. And, there are no gel
scrolls to burn out or replace. See Appendix C for more
information on Installing and Maintaining ColorMerge modules.
ColorMerge Features
•
Easy Installation (locks onto existing bayonet lens mount with no modifications)
•
High-efficiency dichroics (less light loss with dichroic color than with a gel)
•
No interference with Source Four optics (use with any lens type)
•
Smooth color mixing (including pastel and saturated colors)
•
Fully dichroic colors that never fade
•
Full control over color mixing from smooth, stepless movement (allowing slow,
imperceptible color fades) to rapid color changes
•
Silent operation (no fans)
•
Live color fading from one color to another at any speed with no strange,
intermediate colors
•
No interference with Source Four's gobos, irises, or gobo rotators
•
Operates on 3 DMX channels: Yellow, Magenta, and Cyan
Dichroic Theatre™ User Manual
™
ellipsoidal fixture.
Features and Specifications
1
™
1-5
Advertisement
Table of Contents
