Table of Contents
Advertisement
Chapter 2:
Setup and Configuration
Unpacking the Products
Unpack your products and verify that they are undamaged. If there is no damage,
continue with the rest of the setup procedure described in this chapter. If there is
damage, notify both the shipping agent and the sales agent immediately.
Save the shipping carton and packing materials. The carton and packing materials
are specifically designed to protect the product during transport. High End Systems®
assumes no responsibility for products that are damaged during transport. Return a
product for repair in its original shipping carton and packing materials.
Before returning anything to the factory, call your High End Systems dealer/
distributor for a Return Material Authorization (RMA) number. The factory cannot
accept any goods shipped without an RMA number.
This chapter outlines the ColorPower Setup as well as setting up a ColorPower
supply link and adding the ColorPower supply link to a DMX link.
For information on setting up your color mixing units, see the appropriate appendix
at the back of this manual.
ColorPower Setup
The ColorPower supply ships with the following items:
•
ColorPower supply
•
User manual
•
Two (2) terminator plugs
•
Safety cable
Installing a Power Cord Cap
ColorPower ships with a power cord with a Standard NEMA 5-15 cord cap. Different
locations may require a different power cord cap to connect the fixture to a power
source. Because of the variety of power cord caps used worldwide, High End
Systems, Inc. cannot make specific recommendations for the power cord cap.
Contact a local authority for the type of power cord cap needed. When installing the
power cord cap, note that the cores in the mains lead are colored in accordance with
the following code:
Dichroic Theatre™ User Manual
Setup and Configuration
2
2-1
Advertisement
Table of Contents
