Table of Contents
Advertisement
Information (INFO) Menu
Use this Menu option to display information on software versions and connected
units.
Display the Software Version (VERS)
To view the Software version currently running on the fixture:
1. If you are not already in the Menu system, press and hold the <Menu> button
dMX
until
appears on the LED display.
2. Using the <Up> and <Down> arrow buttons, scroll to the
the <Enter> button to select.
3. Using the <Up> and <Down> arrow buttons, scroll to the
press the <Enter> button to select. The current ColorPower software version
number will be displayed. Check with the High End Systems Website
(www.highend.com) to verify that this is the latest version. If you need to install
new software, see "Verifying and Uploading Software" on page 3-1.
Display the Mode (MODE)
The Mode option in the Info Menu displays the currently selected addressing mode of
automatic or manual.
To view the current Mode:
1. If you are not already in the Menu system, press and hold the <Menu> button
dMX
until
appears on the LED display.
2. Using the <Up> and <Down> arrow buttons, scroll to the
the <Enter> button to select.
3. Using the <Up> and <Down> arrow buttons, scroll to the
press the <Enter> button to select. The current ColorPower addressing mode
will be displayed.
Display the Unit Information (UNIT)
To view unit information for each fixture on the link:
1. If you are not already in the Menu system, press and hold the <Menu> button
dMX
until
appears on the LED display.
2. Using the <Up> and <Down> arrow buttons, scroll to the
the <Enter> button to select.
3. Using the <Up> and <Down> arrow buttons, scroll to the
the <Enter> button to select. The available data for the fixtures connected to the
fixture link displays. For example,
connected to the link with a DIP switch setting of 1. A ColorMerge module
connected to the fixture link with a DIP switch setting of 7 will display as
4. Press <Enter> to view the DMX adress.
Dichroic Theatre™ User Manual
1 CC
means that a ColorCommand fixture is
INFO
menu and press
VERS
option and
INFO
menu and press
MODE
option and
INFO
menu and press
UNIt
option and press
7 CM
Operation
3-5
3
.
Advertisement
Table of Contents
