Connecting The Multi Cable To Your System; Connecting Sdi Devices To Multi - Matrox Multi Installation And User Manual

Connecting the Multi cable to your system

The Multi cable is the link between the Multi card and your external devices. The
Multi cable includes all the available connectors for your Multi system, except
for the SDI connectors, which are located on your Multi card (see
SDI devices to Multi"
Connect the Multi cable to the corresponding connector on your Multi card, and
your external devices to the corresponding connectors on the Multi cable.
Matrox Multi card
(installed in Mac system)

Connecting SDI devices to Multi

Your Matrox Multi card includes four SDI connectors. Connect an SDI device to
your Multi via an SDI cable connected to the corresponding connector on your
Multi card.
on page 11).
SDI cable
(BNC connector)
Matrox Multi card
(installed in Mac system)
Connecting the Multi cable to your system
Matrox Multi cable
To the corresponding connectors
on your external devices (see
"Multi input and output
descriptions" on page 13).
To the corresponding
connector on your
external device (see
"Multi input and
output descriptions"
on page 13).
11
"Connecting