Removing Your Matrox Multi Software - Matrox Multi Installation And User Manual

²Caution
Do not power off your computer, or interrupt the firmware update
during the update process. Doing so may damage your Multi card.
Alternately, you can update your Multi firmware by running the Matrox
Firmware Updater from the Finder window as follows:
Make sure that your Matrox Multi card is installed in your computer (see
1
"Installing your Matrox Multi card"
Start your computer.
2
In the Finder menu, choose File > New Finder Window .
3
Choose Applications > Matrox Multi Utilities , and double-click the
4
firmware updater file to run the Matrox Firmware Updater. You'll be
required to shut down your system to complete the firmware update.

Removing your Matrox Multi software

In the Finder menu, choose File > New Finder Window .
1
Choose Applications > Matrox Multi Utilities , and double-click the
2
software uninstaller file.
In the uninstaller dialog box, select or clear the Delete the Matrox
3
software user preferences
in the Matrox Multi preferences window will be removed from your
computer. Clear this option if you wish to keep your current Multi user
settings for a future Multi software installation.
Click Continue .
4
Enter your administrator password, and click OK to remove the Multi
5
software from your computer.
on page 6).
option. When selected, all current user settings
Removing your Matrox Multi software
7