Storing Found Ctcss Or Dcs Codes - Grecom EZ Scan-SD PSR-700 Owner's Manual

Navigates to the EZ Scan-SDʼs Main Menu
Search Menu
Navigates to the Search Menu
Cancel Changes
Exits the Limit Search Menu without saving any changes
Save Changes
Saves your changes and exits the Limit Search Menu
Attenuator
When checked, attenuation is enabled when using Limit Search.
Attenuation limits the effective range of Limit Search and may
help reduce interference from strong local transmitters. Use the
▶/II/SEL
Zeromatic
Enables or disables the EZ Scan-SDʼs Zeromatic circuit.
Zeromatic helps the EZ Scan-SD tune to exact frequencies when
searching. Use the  or  keys to toggle Zeromatic enabled/
disabled status.
Delay
Enables or disables delay when using the Limit Search feature.
When delay is enabled, the EZ Scan-SD waits for two seconds
after a transmission to receive reply traffic before resuming
search. Use the  or  keys to toggle delay enabled/disabled
status.
Lo
Sets the lower frequency for the Limit Search frequency range.
Press the  key, then follow the on-screen instructions to edit
and save the lower frequency.
Hi
Sets the upper frequency for the Limit Search frequency range.
Press the  key, then follow the on-screen instructions to edit
and save the upper frequency.

Storing found CTCSS or DCS codes

Your EZ Scan-SD is able to quickly identify the CTCSS or DCS
subaudible squelch code used on many conventional radio
EZ Scan-SD User Manual!
or  keys to toggle Attenuator status.
Page 55