Editing Objects - Grecom EZ Scan-SD PSR-700 Owner's Manual

Editing Objects

From time to time you may find it necessary to edit the objects
that you have imported from the library into your Scanlists. This
can be accomplished using the EZ Scan-SD itself, or you can
use the EZ Scan-SD PC Application.
To edit objects using the EZ Scan-SD, follow the instructions
above for Browsing Scanlists and Objects to select the object
you wish to edit, then press the
Menu. Alternatively, you may press the
Scan-SD stops on an active object while scanning to edit that
object.
To change an option use the  and  keys to scroll to the
option you wish to change, then press the  key to toggle values
or proceed to the next step.
The following options are available in the Object Menu:
Store SQ code
Only appears when the MENU key is pressed while monitoring a
conventional channel that is set for CTCSS or DCS search
mode. Selecting "Store sq code" stores the value of the found
CTCSS or DCS code into the record for the conventional
channel, and subsequent transmissions must have a matching
CTCSS or DCS squelch code value to be monitored by the EZ
Scan-SD.
Main Menu
Navigates to the EZ Scan-SDʼs Main Menu
Cancel Changes
Exits the Object Menu without saving any changes
Save Changes
Saves your changes and exits the Object Menu
Alpha Tag
Allows you to change the name of the selected object. Follow the
on-screen instructions and use the     keys to change
the object name.
Set Scanlists
EZ Scan-SD User Manual!
MENU
key to activate the Object
MENU
key when the EZ
Page 43