Ez Scan-Sdʼs Main Menu - Grecom EZ Scan-SD PSR-700 Owner's Manual

Unable to read valid low-level file system information (partition tables, etc.)
from installed SD Card at power-up:
No file system on SD Card
SD Card has a cluster size other than 32kB – 32kB is required by EZ Scan-
SD:
Bad file system: 32k clusters required
Unrecoverable error reading the SD Card. Power-cycle may resolve:
SD Read Error
Unrecoverable error writing the SD Card. Power-cycle may resolve:
SD Write Error
The SD Card has no more free space:
SD Card Full!
EZ Scan-SD's Main Menu
The heart of the EZ Scan-SDʼs user interface is the Main Menu,
where all of the major functions are controlled. The following
options are available in the Main Menu:
Scan
Begins scanning of imported objects in enabled Scanlists. Use
the  or
Browse Objects
Enters Scanlist Browse mode, which allows you to browse the
objects that you have imported into Scanlists. Use the  or
▶/II/SEL
Scanlists
Accesses the Scanlists utility to enable, disable or rename
Scanlists. Use the  or
step, then use the  and  keys to scroll select a Scanlist to
modify. Press the
or press the  and follow the on-screen instructions to rename.
Search
Accesses the EZ Scan-SDʼs Spectrum Sweeper, Service Search
and Limit Search modes. See the Search section of this manual
for more information.
EZ Scan-SD User Manual!
▶/II/SEL keys to activate Scan mode.
keys to activate Scanlist Browse mode.
▶/II/SEL
▶/II/SEL
key to toggle enabled/disabled status,
keys to proceed to the next
Page 41