Enabling/Disabling Scanlists; Renaming Scanlists; Monitoring Imported Objects; Browsing Scanlists And Objects - Grecom EZ Scan-SD PSR-700 Owner's Manual

you will also want to give your Scanlists names that describe the
objects that you have stored in them.

Enabling/Disabling Scanlists

To enable and disable Scanlists for scanning, press the
key until you reach the Main Menu, which is indicated at the top
of the LCD display. Use the  and  keys to scroll to Scanlists,
then press the  key to proceed to the list of Scanlists. Each
Scanlist is preceded with a checkbox. To enable a Scanlist for
scanning, press the
selected Scanlist. To disable a Scanlist for scanning, press
▶/II/SEL

Renaming Scanlists

Giving your Scanlists descriptive names makes programming
and using the EZ Scan-SD much easier. To name a Scanlist,
navigate to the Scanlists menu as described above, and press
the  key to edit the name. Follow the on-screen instructions to
change the Scanlist name.

Monitoring Imported Objects

Browsing Scanlists and Objects

You can easily browse the objects and Scanlists you have
created in the EZ Scan-SD. Press the
Menu is displayed. Scroll to the Browse Objects menu item and
press the  key. Use the   keys to scroll through the
Scanlists, and use the   keys to review the objects in each
Scanlist.

Scanning Objects

The EZ Scan-SD allows you to scan the objects that you have
stored in Scanlists. You can monitor a single object, or, you can
scan all of the objects that you have stored in enabled Scanlists.
You can also pause the EZ Scan-SD on a single object while it is
scanning.
EZ Scan-SD User Manual!
▶/II/SEL
again to remove the checkmark.
key to add a checkmark to the
MENU
key until the Main
MENU
Page 36