Setting Up Scanlists - Grecom EZ Scan-SD PSR-700 Owner's Manual

• Access the Library from the Main Menu
• Scroll to Indiana and press the  key
• Scroll down to Systems and press the  key.
At this level you will see the one system in Indiana with statewide
coverage, the Indiana Project Hoosier SAFE-T state public safety
radio system. If you press the
placed next to the system name, marking every site and
talkgroup on the system for importing into the library (this will
take a few minutes due to the number of sites and talkgroups in
this large statewide system).
However, you may not want to listen to every single talkgroup on
the system, or you may want to restrict operation of the radio on
this system to only those sites you choose, which will give the EZ
Scan-SD less work to do and ultimately speed up its operation.
To refine your selection:
• Press the  key at the System name
• To view and pick sites, scroll to Sites and press the  key.
• To view and pick talkgroups, scroll to Categories and
NOTE: ! Remember, one or more Sites must be selected along with any
!
!

Setting Up Scanlists

Once you have imported some objects into the EZ Scan-SDʼs
Scanlists, you are almost ready to begin monitoring. Before you
use the EZ Scan-SD to monitor your imported objects, youʼll
want to enable the Scanlists where your objects are stored, and
EZ Scan-SD User Manual!
You can pick every site and let the EZ Scan-SD do the
work for you, finding the best site to use, or, you can
speed things up by selecting the sites that are close to
your location.
press the  key, and either pick entire Categories to
select every talkgroup in the category, or drill into a
category to view and pick talkgroups that are grouped in
the category.
talkgroup objects that you pick in a System in order for the
talkgroups to be imported to Scanlists.
▶/II/SEL
key, a check will be
Page 35