Using Vehicle Battery Power; Browsing The Library, Picking Objects And Importing To Scanlists; Overview; Browse The Library - Grecom EZ Scan-SD PSR-700 Owner's Manual

Using Vehicle Battery Power

You can power the scanner using an optional car USB power
adaptor and the supplied USB power/data cable.
To power the scanner using a car USB power adaptor, connect
the USB plug end of the supplied USB power/data cable to the
car USB power adapter, and connect the scanner data plug end
of the supplied USB power/data cable to the scannerʼs PC/IF -
PWR jack. To prevent corruption of SD Card data, always power
the EZ Scan-SD off using the front panel
connecting or disconnecting external power sources.
WARNING:! Always use the USB cable included with your EZ Scan-SD
!
!
!
NOTE: ! If you use a cigarette-lighter USB power cable and your vehicleʼs
!
!
!
!

Browsing the Library, Picking Objects and Importing to Scanlists

Overview

Programming the EZ Scan-SD consists of three basic steps, and
youʼll follow these steps each time you want to transfer new
objects from the Library to the EZ Scan-SDʼs Scanlists. The
three steps are as follows:

Browse the Library

Much like a real library, youʼll browse the EZ Scan-SDʼs Library
to find objects that you want to monitor. the EZ Scan-SDʼs
Library is organized primarily by US States, then by Counties/
Independent Cities.

Pick objects from the Library

When you find an object or group of objects that you want to
monitor, you "pick" them by selecting them, which marks them for
the Import objects to Scanlists step.
EZ Scan-SD User Manual!
when connecting your scanner to a computer or to an external
power supply. Using other cables may damage the EZ
Scan-SD.
engine is running, you might hear electrical noise from the engine
while scanning. This is normal. Some external USB power supplies
may generate RF noise that can interfere with the EZ Scan-SDʼs
reception.
button before
Page 29