Grecom EZ Scan-SD PSR-700 Owner's Manual page 45

Allows you to change the Scanlists that the selected object is a
member of. Use the
by adding or removing checkmarks to Scanlists.
Locked Out
When checked, the selected object is Locked Out and will not be
scanned. Locked Out status is not changed when the Main
Menuʼs Restore Skipped utility is used. Use the
toggle Locked Out status.
Skipped
When checked, the selected object is Skipped and will not be
scanned. Skipped status is restored when the Main Menuʼs
Restore Skipped utility is used. Use the
toggle Skipped status.
Priority
When checked, Priority is enabled for the selected object. When
enabled, Priority causes the scanner to check for activity more
frequently on objects with Priority enabled. Priority Mode must be
enabled from the Main Menu to use the Priority feature. Use the
▶/II/SEL
indicated in the object displayʼs psD indicator. "p" indicates that
priority is not enabled for the object, and "P" indicates that priority
is enabled for the object.
Delay
Enables or disables delay for the selected object. When delay is
enabled, the EZ Scan-SD waits for two seconds after a
transmission to receive reply traffic before resuming scanning.
Attenuate
When checked, attenuation is enabled for the selected object.
Attenuation may help reduce interference from strong local
transmitters. Use the
status. Attenuate is not available in the Object Menu for trunked
talkgroups.
Alarm
Defines an audible alarm that is heard whenever there is activity
on the object. Use the  or  keys to select the desired alarm
sound.
EZ Scan-SD User Manual!
▶/II/SEL
or  keys to toggle Priority status. Priority status is
▶/II/SEL
key to change Scanlist membership
▶/II/SEL
▶/II/SEL or  keys to
or  keys to toggle Attenuate
key to
Page 44