Materials - Network Technologies VOPEX-C5HDMI-4 Installation And Operation Manual

NTI VOPEX HDMI Splitter/Extender

MATERIALS

Materials supplied with this kit
•
NTI VOPEX-C5HDMI-4 Splitter
•
110-220VAC, 50 or 60Hz-12VDC/3A AC Adapter
•
This manual
Materials Not supplied but REQUIRED:
•
XTENDEX HDMI Remote(s)
•
CAT6 Solid unshielded twisted pair (UTP) cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc.
(see page 9 for proper EIA/TIA 568 B wiring method) Stranded cable is not recommended for use.
•
A HDMI-xx-MM HDMI male-to-male cable for the video source and another for the display to be connected to the XTENDEX
Remote Unit. Cables are available from NTI where x= 3, 6, 14, 20, and 30 feet.
HDMI Type A
HDMI-A-Male
Male
Also available from NTI are DVI-HDMI-x-MM DVI-D Single link male to HDMI male cables (where x- 3, 6, 10, and 15 feet)
DVI-D-Male
DVI-D-Male
Cables can be purchased from Network Technologies Inc by calling (800) 742-8324 (800-RGB-TECH) in the US and Canada or
(330) 562-7070 (worldwide).
:
HDMI-xx-MM
(3,6,14,20 and 30 foot cables available)
DVI-HDMI-xx-MM
(3,6,10 and 15 foot cables available)
1
HDMI Type A
HDMI-A-Male
Male
HDMI Type A
HDMI-A-Male
Male