Table of Contents
Advertisement
NTI VOPEX HDMI Splitter/Extender
INTERCONNECTION CABLE WIRING METHOD
The connection cable between the remote and local is terminated with RJ45 connectors and must be wired according to the
EIA/TIA 568 B industry standard. Wiring is as per the table and drawing below.
Pin
Wire Color
1
White/Orange
2
Orange
3
White/Green
4
Blue
5
White/Blue
6
Green
7
White/Brown
8
Brown
LED INDICATIONS
The two LED's on the RJ45 connectors of the components in this manual have the following meaning:
VOPEX: All ports: Right = Power ON,
Left: Flashing = Waiting for receiver ready;
Solid = Receiver is attached to the port, EDID is validated, HDCP is active and working
ST-C5HDMI-150 Receiver: Right = Power ON,
Left = Receiving HDMI signals
ST-C5HDMI-RD-150 Receiver:
"RJ45-In" (Left): Left = Power ON,
Right: Flashing = Waiting for the display ready;
Solid= Display is attached, EDID is validated, HDCP is active and working.
"RJ45-Out" (Right): Left = Receiving the HDMI signal from transmitter;
Right: Flashing =Waiting for the downstream receiver on the UTP port ready;
Solid = downstream receiver is attached to the ST-C5HDMI-RD-150, EDID is validated,
ST-C5HDMI-RD3-150 Receiver:
"RJ45-In" (Left): Left = Power ON,
Right: Flashing = Waiting for any display on the HDMI port ready;
Solid = At least one display is ready on the three HDMI ports, EDID is validated, HDCP is active and
"RJ45-Out" (Right): Left = Receiving the HDMI signal from transmitter;
Right: Flashing =Waiting for the downstream receiver on the UTP port ready;
Solid = Downstream receiver is attached to the ST-C5HDMI-RD3-150, EDID is validated,
Pair
Function
2
T
2
R
3
T
1
R
1
T
3
R
4
T
4
R
HDCP is active and working
working.
HDCP is active and working
Pair 3
Pair 2
Pair 1
T
T
R
R
T
R
T
1
2
3
4
5
6
7
+
-
+
-
+
-
+
Figure 6- View looking into RJ45 female
9
Pair 4
R
8
-
Advertisement
Table of Contents
